JBC SF Guide Kit Ø 0.8 for SF280 with Perforation vendor_CAB and IEC/EN 61010-1 2nd Edition

and IEC/EN 61010-1 2nd Edition for measurement CAT III 1000 V and CAT IV 600 V Agency approvals 2000 m CAT III 1000 V

4 x Plain slot insert bits: 3

The 424039 is a Quick Release Arbor with 11mm hex drive and 1/4-inch pilot drill and fixing pins for use with hole saws from 32 to 150mm

50 Hz or 60 Hz Normal mode rejection > 60 dB at 50 Hz or 60 Hz Overload protection 1100 V RMS Input impedance (nominal) > 10 MΩ < 100 pF Common mode rejection ratio

True RMS reading

JBC SF Guide Kit Ø 0.8 for SF280 with Perforation vendor_CAB and IEC/EN 61010-1 2nd EditionOverview Guide Kit for SF280 Auto Solder Wire Handle compatible with 0. 8 mm single core solder wires. A small blade perforates the solder wire down to the flux core while feeding it. This perforation process allows better flux flow and outgassing avoiding solder and flux splashing during the soldering process. You can easily change the guide kit depending on the solder wire used. Guide Kit compatible with SF Auto Solder Wire Feeder.